Bathroom Renovation – Setting Up Shower Rough In Valve

When planning a bathroom renovation, one of the most important steps is setting up your shower rough in valve. This involves selecting and installing the right plumbing fixtures and fittings, so that you have everything you need to create a functional and beautiful space.

How to Install Shower Valve Rough In

Rough in valve refers to the valve that is used to connect the shower arm and supply line, enabling you to adjust both water pressure and temperature. To install your shower valve rough in, you will need some basic plumbing skills and tools, such as a pipe cutter, Teflon tape or plumber’s grease, an adjustable wrench, a hacksaw blade, and a hammer.

  1. Begin by turning off the water supply to your bathroom, and then remove the old shower valve rough in. To do this, you will need to unscrew the retaining nuts that hold it in place.
  2. Next, measure the distance between the studs in your wall, so that you know how wide to make your hole. Use a hacksaw blade to carefully cut a hole in the wall, large enough to accommodate your new shower valve rough in.
  3. Once you have made the correct size hole, apply some plumber’s grease or Teflon tape to the threads of the shower valve rough in, and then insert it into your hole.
  4. On the other side of the wall, screw on the retaining nuts, using an adjustable wrench. Be sure to not overtighten these, as this could damage the valve.
  5. Finally, turn on the water supply and test your new shower valve rough in by turning on the shower and adjusting both the water pressure and temperature. If everything is working properly, you can then proceed with the rest of your bathroom renovation.

Installing a shower valve rough in may seem like a daunting task, but with some basic plumbing skills and the right tools, it is actually quite easy to do. By following the above steps, you can ensure that your new shower is properly set up and ready to use.

How Far Should Shower Valve Stick Out From Wall

When installing a shower valve rough in, it is important to consider the distance that the valve will stick out from the wall. Typically, this distance can vary depending on your specific requirements and preferences. Some factors that may affect how far the shower valve sticks out from the wall include the size of your bathroom or shower space, as well as any other fixtures or plumbing that may be in the way.

It is always best to consult with a professional plumber or contractor before making any final decisions, as they will be able to advise you on the best option for your particular bathroom space. However, as a general rule of thumb, most shower valves should stick out between 2 and 6 inches from the surrounding wall.

This distance will ensure that the valve is easily accessible for both you and your guests, while also providing enough space to properly adjust the water pressure and temperature. By taking these factors into consideration, you can be sure to install your shower valve rough in correctly, so that you can enjoy a functional and stylish shower space.

Are Rough in Shower Valves Universal

When installing a rough in shower valve, it is important to consider whether or not the valve is universal. In general, most rough in valves are designed to be compatible with all types of plumbing fixtures and fittings, including shower heads, sprayers, and hand showers.

However, there may be certain cases where you need to use a specific type of valve for your particular bathroom setup. For example, if you have a unique or custom shower head, you may need to use a different type of valve in order to properly install it.

You May Also Like